TBS Tango Controller

How to connect a TBS Tango Controller via Micro USB Cable

• Hold the DOWN button and the power button simultaneously to turn on the controller and access the calibration menu.
• Select Calibration from the onscreen menu and follow the instructions. 
  
  
• You will be taken to a menu listing Dial E, Dial F, Stick 1, Stick 2, Stick 3, Stick 4.
  
  
  • From here move the Left Stick up, down, left, and right to calibrate it.
    
    
  • Repeat this process with the Right Stick.
    
    
  • Next move both of the Dials located on the top ridge of the controller in both directions to calibrate them. 
    
    
  • Upon completing the above steps, each of the entries should have green numbers next to them. You may now select Next to move on with Calibration. 
    
    
• The next section will have you calibrating the switches and buttons on the face of the controller. Follow the onscreen instructions until all of the entries have a green DONE next to them. 
  
  
• Once all the entries are DONE press Next to complete setup. 
  
  
• Now turn your controller off and back on again. 
  
  
• Plug your controller into your computer and launch The Drone Racing League Simulator.
  
  
• Your controller should be recognized in the game and have a listing in the bottom left of the screen. 
  
  
• Using the arrow keys to navigate the menu, Click on Settings> “CONTROLLER SETUP”> "AUTO CALIBRATION". Go through the on screen instructions and you’re free to fly.
  
  
• If the game is not detecting the controller, try turning off the game, unplugging the controller, and turn the controller off and then on again, plug the controller back in, restart the game and try the in-game process again.
  
  
• If you are having trouble with the Calibration process of the controller, here is a video guide that may help. Please note that this video nor its maker are in no way affiliated with DRL.